MAKING, OPEN, AND STORING DOCUMENTS HTML
Creating a new blank HTML document:- In the display windows, select File> New.To open an existing HTML file:- Select the File menu> OpenYou can select the HTML file you want.
Creating a new document based on the template:- Select File> New from Template.Dialog
box will appear, listing templates - templates (you have to make a
template first before creating a new document based on the template)- Select one of the templates. The new document will be created based ontemplate.
Storing documents:- Select File menu> Save.- Type a file name and specify where you want to save the file.Note: Dreamweaver will automatically save the filehtm or html form.- Click the Save button to save the file.
WORKING WITH TABLESTables used for formatting data in positions of columns and rows.The intersection between the row and column is called a cell, and we canenter data in the cell.Inserting a tableTo insert a table into the homepage, firstplace the cursor to the desired place. Then, choose one among 3the following ways:1. Click the Insert Table menu
2. Click the "Insert table" in the Object panel, Common category.
3. Press the shortcut key: Ctrl + Alt + TThen will come the Insert Table dialog boxEnter the desired specification tables on the dialog box.1. Fill in the number of rows in the "Rows" and the number of columns in the "Columns".2. Next, determine the width of the table to the page. In the example imageabove, the table will be included berlebar 200 percent ("Width: 200Percent "). That is, the width of the table later is 200 percent of the widthpage. If you want a table width in pixel units (fixed size),fill in the number of pixels in the Width, and then change the dropdown boxreads Percent to Pixels. The width of each column will be divided equallyaverage of the width of the table and can be changed at will change. And that is the picture above has been changed from percent to pixels3. Next, enter the desired width of the table border in unitspixel. If dikosongi then be 0 (zero) and the table was not given a border.4. If desired, enter the Cell Padding and Cell Spacing. Cell Spacingmean distance between the cells in the table, while the Cell Padding mean distanceof border cell to cell contents. When finished, click the OK button. Ifwant to cancel, press Cancel.After pressing the OK button, then the table will be included in a pageYou.
Insert Flash ButtonIn Dreamweaver you will be given the ease in designing websitedynamic with the button-button menu in documentyou. Macromedia Dreamweaver Flash Button can directly enterhighly dynamic and animated in a variety of forms.
1. Click the cursor on the spot where you want to insert the image.
2. Click Insert> Media drag> select Flash Button.
Or can jga with Click the flash button on the Object panel.
3. Then it will come out a dialog box, which you have to fill, by selectingbutton shapes, write text and type to the size of the text to bedisplayed on the button, enter the address another page (link). (IN THE SENSE OF EACH ACCORDING ISI'')
5. And if it all. Then in the Click OK.
Insert Image or picture
You will learn two ways to enter the image onDreamweaver, by using the main menu and theusing the Object panel.
1. Click the cursor on the spot where you want to insert the image.
2. Select the menu Insert> Image or can be by pressing the key combination Ctrl + Alt + I on the keyboard.
3. Looks dialog box to select the image file, open the folder images. Chooselogo file, the dialog box on the right side you will see a preview of the image.4. Click OK, then the image will be entered in your document.
5. For how to use the Object panel; click the insert image buttonthe Object panel.
8. Then the dialog box will appear to look the same, do asthe previous step.
CHANGING COLORS IN TEXTIn Dreamweaver, there is an assortment of the dialog box, as well as theProperty inspector there is a menu for color selection boxes for text.You just choose the colors of your liking.
1. Select the text you want to change your color.
2. Shadding text (press the left button on the mouse, select the textthat will change color).
3. Then move your cursor to the Property inspectorbar, click on the color area.
4. Move the cursor to any place, then the text you arechange colors.
REPLACE OR ADD WEB LAYOUT DESIGN background image
In the Property inspector bar, you can change or add background images web layout using Page Properties.
1. Click the Page Properties in the Property inspector bar.
2. Looks dialog box to select the image file, click Browser.
3. Select an image file in the dialog box right side you will see a preview of the image. Then click OK.
4. Then click Ok.
FLASH ANIMATION ADD
You will learn two ways to incorporate flash animation onDreamweaver, by using the main menu and theusing the Object panel.
1. Click an insertion point at the place where you want to insert the flash.
2. Select the menu Insert> Media> Flash or can be by pressing the key combination Ctrl + Alt + F on your keyboard.
3. Looks dialog box to choose flash files, open the flash folder. Chooseflash files SWF berextension'''', then click OK.
4. And if out of this dialog box. Simply click on OK only (no need to fill in what is not well'').
5. After clicking OK, the image will be entered in your document.
6. For how to use the Object panel; click button insert flashthe Object panel.
7. Then the dialog box will appear to look the same, do asthe previous step.Ø Note: Flash animation does not get us the results in Dreamweaver, but we can see the preview through a web browser as follows:1. You can view web pages in the browser (InternetExplorer, Mozilla, Chrome, etc.) by clicking on the Preview Browser via toolbar button that is on the layout.
2. After select the web browser that you want, then the result will appear in the web browser.
Creating a Hyperlink from the Property inspector
You can create a hyperlink text from page toanother page using the Property inspector facilities.
1. Select the text that you want a hyperlink.
2. Shadding text (press the left button on the mouse, select the textto be in the link).
3. Then move your cursor to the Property inspectorbar, click on the link area type the name of the destination file.
4. You can also choose the destination of a link by opening the folder symbol,then the dialog box will appear, where you can select the file youwant. Then click OK.
5. Move the cursor to any place, then the text you arehyperlink.
And so many of my tutorials give, hopefully with the tutorial, you can create more by using Dreamweaver.
Jumat, 23 November 2012
Material Caring for Multimedia Equipment
Caring for Camcorders
Do tingalkan tape in your camcorder when not in use. Cassettes can cause friction and this can cause problems in the process of recording and playback
Do not insert a video cassette in really cold conditions. Moisture from the warm air can membut cassette attaches to the drum so that the damage can damage the tape and the video head
Do not leave the battery in the camera when not in use. Some interesting camera battery energy in small amounts, but the constant so that it can drain the battery
Do not leave the camcorder tapes in the car exposed to hot air
Do not put labels on label tape camcorder which is probably against the cassette door opener. This can cause the tape stuck on the camera
Treat your handycam to give it to the technician to clean the tape head when dirty. Such a treatment could make your camera more durable
Caring for Digital Cameras
Avoid direct contact with sunlight.
Keep your digital camera to avoid excessive shock
Clean the camera and lens.
Avoid scratches on the lens
Avoid sea water.
Do not be too frequent cleaning or cleaning the inside of the lens when the moldy
Do not store it in the closet
Beware of mothballs
We recommend that you remove the battry when the digital camera is not going to use, and keep it away from the fire battry
Do not ever remove battry or memory card while the camera is still alive, because it would damage the image or the memory card itself
Insert the memory card correctly, because if one of the camera will hang
It is important to install your digital camera to your computer first, also format the internal and external memory card when using it the first time
Do tingalkan tape in your camcorder when not in use. Cassettes can cause friction and this can cause problems in the process of recording and playback
Do not insert a video cassette in really cold conditions. Moisture from the warm air can membut cassette attaches to the drum so that the damage can damage the tape and the video head
Do not leave the battery in the camera when not in use. Some interesting camera battery energy in small amounts, but the constant so that it can drain the battery
Do not leave the camcorder tapes in the car exposed to hot air
Do not put labels on label tape camcorder which is probably against the cassette door opener. This can cause the tape stuck on the camera
Treat your handycam to give it to the technician to clean the tape head when dirty. Such a treatment could make your camera more durable
Caring for Digital Cameras
Avoid direct contact with sunlight.
Keep your digital camera to avoid excessive shock
Clean the camera and lens.
Avoid scratches on the lens
Avoid sea water.
Do not be too frequent cleaning or cleaning the inside of the lens when the moldy
Do not store it in the closet
Beware of mothballs
We recommend that you remove the battry when the digital camera is not going to use, and keep it away from the fire battry
Do not ever remove battry or memory card while the camera is still alive, because it would damage the image or the memory card itself
Insert the memory card correctly, because if one of the camera will hang
It is important to install your digital camera to your computer first, also format the internal and external memory card when using it the first time
Performing Basic Operating System Installation
Performing Basic Operating System Installation
After we finished the stage assembling computer then we have to do next is to install the Operating System and Application Software. for
we can use the operating system such as Windows 98, Windows XP, Windows Vista, Linux, etc.. Once we install the operating system later next step we do not forget to install the motherboard drivers, or other drivers that are considered necessary and mandatory to be installed as VGA Drivers, Sound Drivers, Modem Drivers, etc.. If operting System and Driver-Driver is installed then the next we did was install Application Software such as Microsoft Office, Open Office, Acrobat Reader, Winamp, and software application to another according to the needs of the owner of the computer.
Now we're going to install the operating system, the OS will be installed here is windows xp OS. The steps of installing windows xp namely:
1. Prepare Cd Install Windows XP bootable (windows xp cd that can be
boot / bootable).
2. Remember Your computer must have a CD-ROM.
3. Backup data / documents what you think is important that is in the drive
Eg C to another drive to the D drive, if your computer has been previously
operating system installed and placed on drive C. Since all
data / programs that are in drive C all is lost, unless you
repair / fix the data / programs on the C drive will not be lost.
4. Prepare Cd drivers required by your computer, such as drivers
motherboard, sound, and a VGA card driver.
5. Once everything is ready, we immediately wrote proceed to the stage of the process
nstalasi.
After we finished the stage assembling computer then we have to do next is to install the Operating System and Application Software. for
we can use the operating system such as Windows 98, Windows XP, Windows Vista, Linux, etc.. Once we install the operating system later next step we do not forget to install the motherboard drivers, or other drivers that are considered necessary and mandatory to be installed as VGA Drivers, Sound Drivers, Modem Drivers, etc.. If operting System and Driver-Driver is installed then the next we did was install Application Software such as Microsoft Office, Open Office, Acrobat Reader, Winamp, and software application to another according to the needs of the owner of the computer.
Now we're going to install the operating system, the OS will be installed here is windows xp OS. The steps of installing windows xp namely:
1. Prepare Cd Install Windows XP bootable (windows xp cd that can be
boot / bootable).
2. Remember Your computer must have a CD-ROM.
3. Backup data / documents what you think is important that is in the drive
Eg C to another drive to the D drive, if your computer has been previously
operating system installed and placed on drive C. Since all
data / programs that are in drive C all is lost, unless you
repair / fix the data / programs on the C drive will not be lost.
4. Prepare Cd drivers required by your computer, such as drivers
motherboard, sound, and a VGA card driver.
5. Once everything is ready, we immediately wrote proceed to the stage of the process
nstalasi.
Assemble Personal Computers
Assemble Personal Computers Supplies / Equipment:
1. Mainboard / Motherboard
2. Processor
3. Heatsink + Cooling Fan
4. VGA Card (VGA)
5. Sound Card (Sound Card) if there
6. HDD (Hard Disk Drive)
7. FDD (Floppy Disk Drive)
8. CD ROM / RW or DVD ROM / RW
9. Monitor
10. Keyboard
11. Mouse
12. Active Speaker
13. Power cable (monitor + CPU)
14. IDE Cable
15. FDD cable
16. Cassing + Power Supply
17. Pliers
Work steps:
1. Preparing and Observing Mainbord / Motherboard
a. Prepare the motherboard and observe the parts carefully. If necessary component positioning images on them for more details.
b. After that open the lock socket processor.
2. Take Processor
a. Note that the processor has a mark on one corner, and in this case is usually marked with indentations, holes or darts.
Work steps:
1. Preparing and Observing Mainbord / Motherboard
a. Prepare the motherboard and observe the parts carefully. If necessary component positioning images on them for more details.
b. After that open the lock socket processor.
2. Take Processor
a. Note that the processor has a mark on one corner, and in this case is usually marked with indentations, holes or darts.
b. Match the sign with the markings on the processor socket.
c. If you do the above correctly, then the processor will be incorporated into socketnya properly (If the processor is not installed properly DO NOT FORCED or suppressed).
d. Key returning the socket by pressing the lever down and hook the existing lock.
3. Installing the Cooling Fan
a. Heatsink and fan are already strung together into one, so you stay put.
b. Before installing, note the position of the power cord for the fan power connector location. Find the shortest distance that the power cable is not in contact with the fan.
c. In this example the Pentium 4 heatsink cooling times this form is round and there are 4 on 4 point locking around the cooler.
1. Installing the Memory
a. To install memory, then open the lock on the second memory slot on the motherboard side.
b. Perhatihkan that each memory chip has a slit on the bottom side. In practice this time we use the double data rate random access memory (DDRAM). There are other types of RAM, but currently hard to find in the market in new condition called syncronous dynamic random access memory (SDRAM).
c. Match this gap with a memory slot. If you were forced to install memory in the wrong direction, it can damage the memory or the motherboard.
d. Press the memory chips on both sides so you hear a "click", and the latch will close by itself.
1. Setting Casing
a. Prepare the chassis to be used.
b. Put on the table or other places that are considered safe.
c. Remove the screws on the back, and then open the side panel with caution, as in the picture below
d. Match the position of the motherboard with the existing holder in the casing.
e. Make sure the legs will support your motherboard part that requires a strong pressure, such as the processor socket or slot memory. Do not forget any existing motherboard mounting bolt holes must be given the screws / bolts, so a strong position (not wobbly).
1. Installing the Motherboard.
a. Prepare screws used and screwdriver, then attach your motherboard correctly on the stand provided.
b. Strengthen (rotate clockwise) all the screws used for the motherboard is good and right.
1. Prepare Hard Drive
a. Take your hard drive, and note the jumper. In the jumper will there is a choice Master, Slave or Cable Select. This information can be found on the surface of the disk. (Usually already installed in the master position)
b. Attach jumper in accordance with the desired position. If you need to prepare a pair of tweezers to pull out and put the jumper on the hard drive.
1. Replacing the hard drive to Casing
a. Some chassis manggunakan bracket system that can be removed to facilitate the installation of hard drives and floppy drives.
b. Choose the appropriate screws, do not get too big or too long, and attach the mounting screws on the hard drive properly.
1. Connecting the hard drive to the motherboard
a. Note that there are two types of IDE data cable, which is 40-wire and 34-wire. 40-wire cable is used to drive, and the 34-wire cable is used for the floppy disk drive (FDD).
b. Data cabling should not be reversed. On one side there is usually a cable with red color indicating pin number 1.
c. This position is also marked on the hard drive. Normally the position of pin 1 on the disk (red wire) is right next to the power connector (red color anyway).
1. Installing the Floppy Disk Drive (FDD)
a. Installing the Floppy drive, similar to installing the hard drive, except for some models the chassis which separates the floppy and hard drive. Floppy drive directly fed into the case and screw mounted ..
b. Some types of casing, probably need to open the front panel before installing the floppy disk drive.
1. Setting the CD / DVD Drive
a. As with any hard drive, CD / DVD drives also use a jumper to the position of Master and Slave. Set jumper proficiency level in the desired position.
b. If only there was a hard drive, the jumpers are at the Masters.
c. If there are 2 pieces of hard drives on one computer, and both are enabled, then the first hard disk drive used as Master and the other must be set to Slave.
1. Installing a CD / DVD drive
a. To install the CD / DVD drive usually we need to disconnect chassis front panel first, or depending on the type and model of the used casing.
b. Opening the drive cover on the front panel.
c. Put the CD / DVD drive correctly, then close the front panel (if using the front panel).
1. Connecting the CD / DVD drive to the motherboard
a. CD / DVD plugged directly into the casing without the rail and reinforced with appropriate screws.
b. Installation of IDE data cable from the CD / DVD to the motherboard together with the installation disk. Do not forget to tidy up the cables that are not related to each other and "chaotic". Set the track and cable lines neatly, if necessary tie to make it more presentable and pleasing to the eye.
1. Installing Ethernet Card / LAN Card
a. To install the LAN card, you do not need to unlock or something. All you do is match celoah slot LAN Card (not to be confused with the slot AGP / PCI).
b. Install LAN Card with push without being pushy. Up really fast.
1. Install the VGA Card
a. Find VGA slot (typically AGP) on the motherboard, this is an expansion slot closest to the processor, usually located farthest away from the back of the chassis compared to other PCI connectors. Place the VGA card in the slot, then press and roaring with the proper screws.
b. ATI Radeon 9800 (kind of VGA card), the same as other high end graphics cards, require a separate connection from the power supply. Since this card uses the hard disk connector 4 pint sized. Other cards may require a smaller connector.
1. Connecting Cable Connector on Motherboard
a. Now we need to connect the cables from the chassis to the motherboard.
b. This cable consists of power switches, drive indicator, power indicator, reset button and speaker, as shown in the picture below.
c. For chassis that provides front panel, such as universal serial bus (USB), the wires should be connected to the motherboard in order to function normally.
1. Connecting the Power Cord
a. After all is installed, the next step is to connect the power cord from the power supply to the motherboard, hard drive, FDD and CDROM.
b. For Pentium 4 motherboards, there are usually at least 2 power connector should be installed, as shown below.
c. Then connect the power cables as well to the hard drive, floppy and CD / VD. If you use a chassis cooling fan, then connect it to the power supply or to the motherboard, according to the connector that is owned.
1. Prepare Outer Components
a. If the components inside are wrong, so now turn to the outside of the components, such as monitor, keyboard, mouse and speakers.
b. For these components, we simply connect the wires to the terminals that have been determined, such as keyboard, mouse, speakers and others.
c. Do not forget to power cables, both for the chassis and the monitor.
1. Checking the Power Supply
a. Check carefully for the power supply is used. Normal voltage is 220-230 volts. If the supplied switch, then move the switch to the appropriate voltage source.b. Some of the power supply is equipped with a transfer voltage (switch) between 110 -220 Volt.
b. Match the sign with the markings on the processor socket.
c. If you do the above correctly, then the processor will be incorporated into socketnya properly (If the processor is not installed properly DO NOT FORCED or suppressed).
d. Key returning the socket by pressing the lever down and hook the existing lock.
3. Installing the Cooling Fan
a. Heatsink and fan are already strung together into one, so you stay put.
b. Before installing, note the position of the power cord for the fan power connector location. Find the shortest distance that the power cord does not intersect with fan
c. In this example the Pentium 4 heatsink cooling times this form is round and there are 4 on 4 point locking around the cooler.
1. Installing the Memory
a. To install memory, then open the lock on the second memory slot on the motherboard side.
b. Perhatihkan that each memory chip has a slit on the bottom side. In practice this time we use the double data rate random access memory (DDRAM). There are other types of RAM, but currently hard to find in the market in new condition called syncronous dynamic random access memory (SDRAM).
c. Match this gap with a memory slot. If you were forced to install memory in the wrong direction, it can damage the memory or the motherboard.
d. Press the memory chips on both sides so you hear a "click", and the latch will close by itself.
1. Setting Casing
a. Prepare the chassis to be used.
b. Put on the table or other places that are considered safe.
c. Remove the screws on the back, and then open the side panel with caution, as in the picture below.
d. Match the position of the motherboard with the existing holder in the casing.
e. Make sure the legs will support your motherboard part that requires a strong pressure, such as the processor socket or slot memory. Do not forget any existing motherboard mounting bolt holes must be given the screws / bolts, so a strong position (not wobbly).
1. Installing the Motherboard.
a. Prepare screws used and screwdriver, then attach your motherboard correctly on the stand provided.
b. Strengthen (rotate clockwise) all the screws used for the motherboard is good and right.
1. Prepare Hard Drive
a. Take your hard drive, and note the jumper. In the jumper will there is a choice Master, Slave or Cable Select. This information can be found on the surface of the disk. (Usually already installed in the master position)
b. Attach jumper in accordance with the desired position. If you need to prepare a pair of tweezers to pull out and put the jumper on the hard drive.
1. Replacing the hard drive to Casing
a. Some chassis manggunakan bracket system that can be removed to facilitate the installation of hard drives and floppy drives.
b. Choose the appropriate screws, do not get too big or too long, and attach the mounting screws on the hard drive properly.
1. Connecting the hard drive to the motherboard
a. Note that there are two types of IDE data cable, which is 40-wire and 34-wire. 40-wire cable is used to drive, and the 34-wire cable is used for the floppy disk drive (FDD).
b. Data cabling should not be reversed. On one side there is usually a cable with red color indicating pin number 1.
c. This position is also marked on the hard drive. Normally the position of pin 1 on the disk (red wire) is right next to the power connector (red color anyway).
1. Installing the Floppy Disk Drive (FDD)
a. Installing the Floppy drive, similar to installing the hard drive, except for some models the chassis which separates the floppy and hard drive. Floppy drive directly fed into the case and screw mounted.
. Some types of casing, probably need to open the front panel before installing the floppy disk drive.
1. Setting the CD / DVD Drive
a. As with any hard drive, CD / DVD drives also use a jumper to the position of Master and Slave. Set jumper proficiency level in the desired position.
b. If only there was a hard drive, the jumpers are at the Masters.
c. If there are 2 pieces of hard drives on one computer, and both are enabled, then the first hard disk drive used as Master and the other must be set to Slave.
1. Installing a CD / DVD drive
a. To install the CD / DVD drive usually we need to disconnect chassis front panel first, or depending on the type and model of the used casing.
b. Opening the drive cover on the front panel.
c. Put the CD / DVD drive correctly, then close the front panel (if using the front panel).
1. Connecting the CD / DVD drive to the motherboard
a. CD / DVD plugged directly into the casing without the rail and reinforced with appropriate screws.
b. Installation of IDE data cable from the CD / DVD to the motherboard together with the installation disk.
c. Do not forget to tidy up the cables that are not related to each other and "chaotic". Set the track and cable lines neatly, if necessary tie to make it more presentable and pleasing to the eye.
1. Installing Ethernet Card / LAN Card
a. To install the LAN card, you do not need to unlock or something. All you do is match celoah slot LAN Card (not to be confused with the slot AGP / PCI).
b. Install LAN Card with push without being pushy. Up really fast.
1. Install the VGA Card
a. Find VGA slot (typically AGP) on the motherboard, this is an expansion slot closest to the processor, usually located farthest away from the back of the chassis compared to other PCI connectors. Place the VGA card in the slot, then press and roaring with the proper screws.
b. ATI Radeon 9800 (kind of VGA card), the same as other high end graphics cards, require a separate connection from the power supply. Since this card uses the hard disk connector 4 pint sized. Other cards may require a smaller connector.
1. Connecting Cable Connector on Motherboard
a. Now we need to connect the cables from the chassis to the motherboard.
b. This cable consists of power switches, drive indicator, power indicator, reset button and speaker, as shown in the picture below.
c. For chassis that provides front panel, such as universal serial bus (USB), the wires should be connected to the motherboard in order to function normally.
1. Connecting the Power Cord
a. After all is installed, the next step is to connect the power cord from the power supply to the motherboard, hard drive, FDD and CDROM.
b. For Pentium 4 motherboards, there are usually at least 2 power connector should be installed, as shown below.
c. Then connect the power cables as well to the hard drive, floppy and CD / VD. If you use a chassis cooling fan, then connect it to the power supply or to the motherboard, according to the connector that is owned.
1. Prepare Outer Components
a. If the components inside are wrong, so now turn to the outside of the components, such as monitor, keyboard, mouse and speakers.
b. For these components, we simply connect the wires to the terminals that have been determined, such as keyboard, mouse, speakers and others.
c. Do not forget to power cables, both for the chassis and the monitor.
1. Checking the Power Supply
a. Check carefully for the power supply is used. Normal voltage is 220-230 volts. If the supplied switch, then move the switch to the appropriate voltage source.b. Some of the power supply is equipped with a transfer voltage (switch) between 110 or 220 volts.
1. Mainboard / Motherboard
2. Processor
3. Heatsink + Cooling Fan
4. VGA Card (VGA)
5. Sound Card (Sound Card) if there
6. HDD (Hard Disk Drive)
7. FDD (Floppy Disk Drive)
8. CD ROM / RW or DVD ROM / RW
9. Monitor
10. Keyboard
11. Mouse
12. Active Speaker
13. Power cable (monitor + CPU)
14. IDE Cable
15. FDD cable
16. Cassing + Power Supply
17. Pliers
Work steps:
1. Preparing and Observing Mainbord / Motherboard
a. Prepare the motherboard and observe the parts carefully. If necessary component positioning images on them for more details.
b. After that open the lock socket processor.
2. Take Processor
a. Note that the processor has a mark on one corner, and in this case is usually marked with indentations, holes or darts.
Work steps:
1. Preparing and Observing Mainbord / Motherboard
a. Prepare the motherboard and observe the parts carefully. If necessary component positioning images on them for more details.
b. After that open the lock socket processor.
2. Take Processor
a. Note that the processor has a mark on one corner, and in this case is usually marked with indentations, holes or darts.
b. Match the sign with the markings on the processor socket.
c. If you do the above correctly, then the processor will be incorporated into socketnya properly (If the processor is not installed properly DO NOT FORCED or suppressed).
d. Key returning the socket by pressing the lever down and hook the existing lock.
3. Installing the Cooling Fan
a. Heatsink and fan are already strung together into one, so you stay put.
b. Before installing, note the position of the power cord for the fan power connector location. Find the shortest distance that the power cable is not in contact with the fan.
c. In this example the Pentium 4 heatsink cooling times this form is round and there are 4 on 4 point locking around the cooler.
1. Installing the Memory
a. To install memory, then open the lock on the second memory slot on the motherboard side.
b. Perhatihkan that each memory chip has a slit on the bottom side. In practice this time we use the double data rate random access memory (DDRAM). There are other types of RAM, but currently hard to find in the market in new condition called syncronous dynamic random access memory (SDRAM).
c. Match this gap with a memory slot. If you were forced to install memory in the wrong direction, it can damage the memory or the motherboard.
d. Press the memory chips on both sides so you hear a "click", and the latch will close by itself.
1. Setting Casing
a. Prepare the chassis to be used.
b. Put on the table or other places that are considered safe.
c. Remove the screws on the back, and then open the side panel with caution, as in the picture below
d. Match the position of the motherboard with the existing holder in the casing.
e. Make sure the legs will support your motherboard part that requires a strong pressure, such as the processor socket or slot memory. Do not forget any existing motherboard mounting bolt holes must be given the screws / bolts, so a strong position (not wobbly).
1. Installing the Motherboard.
a. Prepare screws used and screwdriver, then attach your motherboard correctly on the stand provided.
b. Strengthen (rotate clockwise) all the screws used for the motherboard is good and right.
1. Prepare Hard Drive
a. Take your hard drive, and note the jumper. In the jumper will there is a choice Master, Slave or Cable Select. This information can be found on the surface of the disk. (Usually already installed in the master position)
b. Attach jumper in accordance with the desired position. If you need to prepare a pair of tweezers to pull out and put the jumper on the hard drive.
1. Replacing the hard drive to Casing
a. Some chassis manggunakan bracket system that can be removed to facilitate the installation of hard drives and floppy drives.
b. Choose the appropriate screws, do not get too big or too long, and attach the mounting screws on the hard drive properly.
1. Connecting the hard drive to the motherboard
a. Note that there are two types of IDE data cable, which is 40-wire and 34-wire. 40-wire cable is used to drive, and the 34-wire cable is used for the floppy disk drive (FDD).
b. Data cabling should not be reversed. On one side there is usually a cable with red color indicating pin number 1.
c. This position is also marked on the hard drive. Normally the position of pin 1 on the disk (red wire) is right next to the power connector (red color anyway).
1. Installing the Floppy Disk Drive (FDD)
a. Installing the Floppy drive, similar to installing the hard drive, except for some models the chassis which separates the floppy and hard drive. Floppy drive directly fed into the case and screw mounted ..
b. Some types of casing, probably need to open the front panel before installing the floppy disk drive.
1. Setting the CD / DVD Drive
a. As with any hard drive, CD / DVD drives also use a jumper to the position of Master and Slave. Set jumper proficiency level in the desired position.
b. If only there was a hard drive, the jumpers are at the Masters.
c. If there are 2 pieces of hard drives on one computer, and both are enabled, then the first hard disk drive used as Master and the other must be set to Slave.
1. Installing a CD / DVD drive
a. To install the CD / DVD drive usually we need to disconnect chassis front panel first, or depending on the type and model of the used casing.
b. Opening the drive cover on the front panel.
c. Put the CD / DVD drive correctly, then close the front panel (if using the front panel).
1. Connecting the CD / DVD drive to the motherboard
a. CD / DVD plugged directly into the casing without the rail and reinforced with appropriate screws.
b. Installation of IDE data cable from the CD / DVD to the motherboard together with the installation disk. Do not forget to tidy up the cables that are not related to each other and "chaotic". Set the track and cable lines neatly, if necessary tie to make it more presentable and pleasing to the eye.
1. Installing Ethernet Card / LAN Card
a. To install the LAN card, you do not need to unlock or something. All you do is match celoah slot LAN Card (not to be confused with the slot AGP / PCI).
b. Install LAN Card with push without being pushy. Up really fast.
1. Install the VGA Card
a. Find VGA slot (typically AGP) on the motherboard, this is an expansion slot closest to the processor, usually located farthest away from the back of the chassis compared to other PCI connectors. Place the VGA card in the slot, then press and roaring with the proper screws.
b. ATI Radeon 9800 (kind of VGA card), the same as other high end graphics cards, require a separate connection from the power supply. Since this card uses the hard disk connector 4 pint sized. Other cards may require a smaller connector.
1. Connecting Cable Connector on Motherboard
a. Now we need to connect the cables from the chassis to the motherboard.
b. This cable consists of power switches, drive indicator, power indicator, reset button and speaker, as shown in the picture below.
c. For chassis that provides front panel, such as universal serial bus (USB), the wires should be connected to the motherboard in order to function normally.
1. Connecting the Power Cord
a. After all is installed, the next step is to connect the power cord from the power supply to the motherboard, hard drive, FDD and CDROM.
b. For Pentium 4 motherboards, there are usually at least 2 power connector should be installed, as shown below.
c. Then connect the power cables as well to the hard drive, floppy and CD / VD. If you use a chassis cooling fan, then connect it to the power supply or to the motherboard, according to the connector that is owned.
1. Prepare Outer Components
a. If the components inside are wrong, so now turn to the outside of the components, such as monitor, keyboard, mouse and speakers.
b. For these components, we simply connect the wires to the terminals that have been determined, such as keyboard, mouse, speakers and others.
c. Do not forget to power cables, both for the chassis and the monitor.
1. Checking the Power Supply
a. Check carefully for the power supply is used. Normal voltage is 220-230 volts. If the supplied switch, then move the switch to the appropriate voltage source.b. Some of the power supply is equipped with a transfer voltage (switch) between 110 -220 Volt.
b. Match the sign with the markings on the processor socket.
c. If you do the above correctly, then the processor will be incorporated into socketnya properly (If the processor is not installed properly DO NOT FORCED or suppressed).
d. Key returning the socket by pressing the lever down and hook the existing lock.
3. Installing the Cooling Fan
a. Heatsink and fan are already strung together into one, so you stay put.
b. Before installing, note the position of the power cord for the fan power connector location. Find the shortest distance that the power cord does not intersect with fan
c. In this example the Pentium 4 heatsink cooling times this form is round and there are 4 on 4 point locking around the cooler.
1. Installing the Memory
a. To install memory, then open the lock on the second memory slot on the motherboard side.
b. Perhatihkan that each memory chip has a slit on the bottom side. In practice this time we use the double data rate random access memory (DDRAM). There are other types of RAM, but currently hard to find in the market in new condition called syncronous dynamic random access memory (SDRAM).
c. Match this gap with a memory slot. If you were forced to install memory in the wrong direction, it can damage the memory or the motherboard.
d. Press the memory chips on both sides so you hear a "click", and the latch will close by itself.
1. Setting Casing
a. Prepare the chassis to be used.
b. Put on the table or other places that are considered safe.
c. Remove the screws on the back, and then open the side panel with caution, as in the picture below.
d. Match the position of the motherboard with the existing holder in the casing.
e. Make sure the legs will support your motherboard part that requires a strong pressure, such as the processor socket or slot memory. Do not forget any existing motherboard mounting bolt holes must be given the screws / bolts, so a strong position (not wobbly).
1. Installing the Motherboard.
a. Prepare screws used and screwdriver, then attach your motherboard correctly on the stand provided.
b. Strengthen (rotate clockwise) all the screws used for the motherboard is good and right.
1. Prepare Hard Drive
a. Take your hard drive, and note the jumper. In the jumper will there is a choice Master, Slave or Cable Select. This information can be found on the surface of the disk. (Usually already installed in the master position)
b. Attach jumper in accordance with the desired position. If you need to prepare a pair of tweezers to pull out and put the jumper on the hard drive.
1. Replacing the hard drive to Casing
a. Some chassis manggunakan bracket system that can be removed to facilitate the installation of hard drives and floppy drives.
b. Choose the appropriate screws, do not get too big or too long, and attach the mounting screws on the hard drive properly.
1. Connecting the hard drive to the motherboard
a. Note that there are two types of IDE data cable, which is 40-wire and 34-wire. 40-wire cable is used to drive, and the 34-wire cable is used for the floppy disk drive (FDD).
b. Data cabling should not be reversed. On one side there is usually a cable with red color indicating pin number 1.
c. This position is also marked on the hard drive. Normally the position of pin 1 on the disk (red wire) is right next to the power connector (red color anyway).
1. Installing the Floppy Disk Drive (FDD)
a. Installing the Floppy drive, similar to installing the hard drive, except for some models the chassis which separates the floppy and hard drive. Floppy drive directly fed into the case and screw mounted.
. Some types of casing, probably need to open the front panel before installing the floppy disk drive.
1. Setting the CD / DVD Drive
a. As with any hard drive, CD / DVD drives also use a jumper to the position of Master and Slave. Set jumper proficiency level in the desired position.
b. If only there was a hard drive, the jumpers are at the Masters.
c. If there are 2 pieces of hard drives on one computer, and both are enabled, then the first hard disk drive used as Master and the other must be set to Slave.
1. Installing a CD / DVD drive
a. To install the CD / DVD drive usually we need to disconnect chassis front panel first, or depending on the type and model of the used casing.
b. Opening the drive cover on the front panel.
c. Put the CD / DVD drive correctly, then close the front panel (if using the front panel).
1. Connecting the CD / DVD drive to the motherboard
a. CD / DVD plugged directly into the casing without the rail and reinforced with appropriate screws.
b. Installation of IDE data cable from the CD / DVD to the motherboard together with the installation disk.
c. Do not forget to tidy up the cables that are not related to each other and "chaotic". Set the track and cable lines neatly, if necessary tie to make it more presentable and pleasing to the eye.
1. Installing Ethernet Card / LAN Card
a. To install the LAN card, you do not need to unlock or something. All you do is match celoah slot LAN Card (not to be confused with the slot AGP / PCI).
b. Install LAN Card with push without being pushy. Up really fast.
1. Install the VGA Card
a. Find VGA slot (typically AGP) on the motherboard, this is an expansion slot closest to the processor, usually located farthest away from the back of the chassis compared to other PCI connectors. Place the VGA card in the slot, then press and roaring with the proper screws.
b. ATI Radeon 9800 (kind of VGA card), the same as other high end graphics cards, require a separate connection from the power supply. Since this card uses the hard disk connector 4 pint sized. Other cards may require a smaller connector.
1. Connecting Cable Connector on Motherboard
a. Now we need to connect the cables from the chassis to the motherboard.
b. This cable consists of power switches, drive indicator, power indicator, reset button and speaker, as shown in the picture below.
c. For chassis that provides front panel, such as universal serial bus (USB), the wires should be connected to the motherboard in order to function normally.
1. Connecting the Power Cord
a. After all is installed, the next step is to connect the power cord from the power supply to the motherboard, hard drive, FDD and CDROM.
b. For Pentium 4 motherboards, there are usually at least 2 power connector should be installed, as shown below.
c. Then connect the power cables as well to the hard drive, floppy and CD / VD. If you use a chassis cooling fan, then connect it to the power supply or to the motherboard, according to the connector that is owned.
1. Prepare Outer Components
a. If the components inside are wrong, so now turn to the outside of the components, such as monitor, keyboard, mouse and speakers.
b. For these components, we simply connect the wires to the terminals that have been determined, such as keyboard, mouse, speakers and others.
c. Do not forget to power cables, both for the chassis and the monitor.
1. Checking the Power Supply
a. Check carefully for the power supply is used. Normal voltage is 220-230 volts. If the supplied switch, then move the switch to the appropriate voltage source.b. Some of the power supply is equipped with a transfer voltage (switch) between 110 or 220 volts.
Langganan:
Postingan (Atom)